Eurocode Audi A4/A5 2.0TSI EPipe Stainless Steel Test Pipe NEW

  • Image 1
11.00 LBS
Calculated at checkout

Part Compatible With The Following:

Product Description

Audi A4/A5 2.0TSI EuroCode Tuning EPipe Stainless Steel TestPipe NEW
The numbers above represent gains at the crank shaft. Click on the graph above to enlarge.

***This is the ORIGINAL B8 Testpipe. Made Here, in the USA FIRST!***

Manufactured from T304 aircraft quality stainless steel with mandrel-bent 3" diameter tubing and brush polished. This TestPipe has proven a solid 25HP & 33lb-ft Torque @ 4000RPM to the WHEELS on the dynamometer. The factory cat is extremely restrictive, and by just replacing it with this bolt on pipe which goes in-line with your factory or aftermarket exhaust system, you will unleash the hidden potential of your 2.0TSI motor not to mention quicker spool up of the turbo.

The information below was obtained from a customer who chose to dyno the car completely stock vs. the EuroCode Tuning TestPipe on California 91oct fuel at an independent shop. All gains were measured at the wheels thus the gains at the crankshaft will naturally be greater due power train loss. The graphs show the gains at the crank shaft.

All numbers indicate increase levels of HP & lb-ft of Torque at the wheels for a Quattro 2.0TSI B8 A4 6 Speed. The gains are identical on a B8 A5 2.0TSI.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!