Loading...Loading

APR 2.8L VR6 24v ECU Upgrade

  • Image 1
SKU:
Contact us to setup an appointment 4
Weight:
0.00 LBS
Availability:
APR products from etektuning.com can only be sold and shipped within the United States.

APR is pleased to present the ultimate ECU Upgrade for the 2.8L 24v VR6 engine. After months of long nights and many hours of testing, development and more testing, we are pleased to offer you an ECU recalibration that is second to none. APR's extensive research and development provides you with a powerful ECU Upgrade with no loss of drivability or reliability. Expect huge increases in low-end torque, improved throttle response and a smoother, more powerful top end.

APR's ECU Upgrade is developed to work within the OEM and Tier 1 Supplier specifications for engine component stress tolerances and performance specifications. APR's ECU Upgrades are available in octane specific versions to allow you to take full advantage of the fuel quality available in your area. APR's patented EMCS functionality puts the control of the engine's operation at your finger tips and allows for additional features and options to be installed to your OEM ECU.

Stages, Requirements, and Recommendations

Click a stage for more information

Stage I ECU Upgrade

 
 
Free Trial Software Yes
Calibrations Stock, 91 Octane, 93 Octane, 100 Octane and Valet
Required Hardware None to Meet Advertised Results
Recommended Hardware APR/Carbonio Intake, APR 2.5" Catback Exhaust

Stage II ECU Upgrade

 
 
Free Trial Software Yes
Upgrade Incentives Existing APR ECU Upgraded Customers may Upgrade for Free
Calibrations Stock, 91 Octane, 93 Octane, 100 Octane and Valet
Required Hardware Tespip or High Flow Catalytic Converter
Recommended Hardware APR/Carbonio Intake, APR 2.5" Catback Exhaust

Features Included

  • APR's Patented Directport Programming Technology
  • APR's EMCS Functionality
  • Exact OEM Calibration Stock Mode
  • 91 Octane Performance Mode
  • 93 Octane Performance Mode
  • 100 Octane Performance Mode
  • Valet Mode
  • Fault Code Erase/Throttle Body Alignment
  • Security Lockout
  • Anti-theft
Application Guide
YearVehicleEngineStockHorsepower IncreasePrice 
2002 - 2005 VW Jetta 2.8L 24v VR6 201 HP / 195 FT-LBS 217 HP / 211 FT-LBS $499.00  
2002 - 2005 VW GTI 2.8L 24v VR6 201 HP / 195 FT-LBS 217 HP / 211 FT-LBS $499.00  

All of the options below are included with purchase.

Program Switching Technology
OptionsPricing
¹Prices applicable to the North American market only.
²Due to many variations between ECU's some programs/options may unavailable.
For a total of 2 programs (i.e. - Stock and Chipped)¹ ² $149¹ FREE!
For a total of 3 programs² $219¹ FREE!
For a total of 4 programs² $289¹ FREE!
Other Available Options
OptionsPricing
¹Prices applicable to the North American market only.
²Due to many variations between ECU's some programs/options may unavailable.
Security Lockout² $59¹ FREE!
Fault Code Erase/Throttle Body Alignment (FCE/TBA)² $59¹ FREE!
Anti-Theft System² $199¹ FREE!

EMCS

EMCS is APR's revolutionary patented Enhanced Modular Chipping System. EMCS is an industry leading technology that brings many new features to the automotive enthusiast. This technology was developed exclusively by Audi Performance & Racing, LLC and demonstrates APR's continued commitment to lead the industry with the most technologically advanced products available.

Want chipped mode? Want to be able to switch back to your stock settings? Want a race mode to run 100 octane fuel at the track? How about a valet mode that limits power? EMCS is the lone technology on the market that can give you all of these options. No changing of the chip or ECU is required. These programs are available at the touch of a button.

Other companies have attempted to imitate EMCS with clumsy external switching devices that only replace portions of a "base" calibration. EMCS is still the only Bosch Motronic Engine Management System enhancement that gives the ECU the ability to completely rewrite the entire operating map data when selecting different programming options. This allows for completely new and independent calibrations for each program selected giving you the best, most powerful and complete Stock Modes, 91, 93 and 100 octane Performance Modes and Valet Modes.

APR's EMCS features and program modes are activated via your OEM cruise control buttons for ease of use and stealth. Your cruise control will continue to function as normal, but will give you the ability to scroll through the programs you have purchased with your APR ECU Upgrade. The procedure is simple and involves only two steps.

How EMCS Works

Step 1

Press and hold the "set" button on your cruise control. After approximately five seconds, the "check engine" light on your dash will begin to blink once per second. This will tell you that you are activating program one. This blinking sequence will continue for approximately five seconds.

After this five second interval, the "check engine" light will begin blinking twice per second. This will indicate that you have activated the second program. This process is continued to access any remaining programs you may have purchased. (three blinks = program three, four blinks = program four).

Step 2

Once you have activated the desired program, simply release the "set" button. The "check engine" light will stop flashing. Turn the ignition key off for 10 seconds, turn the key back on, and you will be locked in that program until you change it again.

It's that simple.

Available Features

APR's EMCS is a truly modular system that allows for future enhancements and features to be added as they are developed without the need for additional hardware. EMCS makes the following advanced features possible:

  • Program Switching Enables you to swap between two or more engine programs using the cruise control stalk. All cars have stock and standard chipped program versions available. Valet, race-gas, and other specialty programs are available for most models.
  • Fault Code Erase/Throttle Body Alignment (FCE/TBA) Fault Code Erase allows you to erase and reset engine related trouble codes without having to use a specialty tool. Throttle Body Alignment allows you to manually perform throttle-body adaptation.
  • Security Lockout Prevents unauthorized personnel from accessing EMCS functions. The user may select any 2 to 4 digit security code. The security code is entered using the cruise control buttons.
  • Anti-Theft You can render your car immobile to thieves, even if there is an attempt to start the car with your own key! For more information about Anti-Theft, click here.

Installation Options

APR's ECU Upgrade is able to be installed by APR's professional dealer network or by APR directly. Most late model applications are available to be installed via DirectPort programming without removing your ECU or even opening the hood. DirectPort Programming is not available for all models and in these rare cases EMCS Modules are able to be soldered to the ECU.

DirectPort Programming

DirectPort Programming is another industry first brought to you by APR. DirectPort Programming is also referred to as "flashing" the ECU with the new operating software contained in APR's ECU Upgrade. No more soldering additional hardware to expensive and delicate factory electronics. DirectPort Programming facilitates ease of installation and offers new features to give you even more flexibility with your OEM ECU. DirectPort Programming is only available by bringing your car to an APR dealer or by mailing your ECU to APR directly.

Demonstration Software

All APR ECU Upgrades installed via Directport Programming are eligible for a 6 hour free trial. This means you can experience the performance of the APR ECU Upgrade for your vehicle at no cost to you for 6 hours of driving time!

Security, Warranty and Money Back Guarantee

All APR ECU Upgrades are fully encrypted to prevent theft of our valuable and proprietary coding information by lesser companies and to provide protection to our clients by keeping the upgrade undetectable to a dealership's VAG diagnostic tool.

All APR ECU Upgrades include a limited lifetime warranty against defects in the software and to provide free updates and reflashes as they become available. Installation may be additional and is not included in the warranty.

All APR ECU Upgrades offer a 30 day money back guarantee with no questions asked. If for any reason you are unhappy with your APR ECU Upgrade you may return the upgrade to your place of purchase for a full refund provided you are within a 30 day period from your time of initial purchase. Installation is not included in the guarantee and is at the discretion of the place of install.

Testimonials

  • Donald M. - I'm running APR on my 24V. The car pulls stronger and smoothly. Rev hang is improved. Throttle response is definitely improved. I'd recommend APR to any 24V owner.

  • Ralph B. - This is how the engine should have been from day one. With the 93 Octane Tuned program the car is more responsive on low end and in the higher RPMs (4500 to 6500) it just comes alive with vigor like never before. Now this is what they mean by a "TUNED" engine. I recomend this to anyone who wants to maximize the output of their engine. I also get better gas milage to boot !!! You make an excellent product, thank you.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Compatible With

 
Eurotek Tuning Logo
accepted credit cards