Loading...Loading

APR ECU Upgrade for the 1.4 TSI/TFSI (EA211)

  • APR High Output 2.0 TSI/TFSI Gen3 ECU Upgrade for the MQB Platform (Contact us to setup an Appointment MQB-B9)
  • 1.4 TSI/TFSI (EA211)

APR

$499.99 $449.99
(You save $50.00)
SKU:
Contact us to setup an Appointment EA211
Weight:
0.00 LBS
Availability:
APR products from etektuning.com can only be sold and shipped within the United States.

VW/AUDI Performance Parts: APR ECU Upgrade for the 1.4 TSI/TFSI (EA211)

Product Features & Benefits

APR is pleased to present the ultimate engine control unit (ECU) upgrade for the 1.4T EA211 engine. APR’s ECU upgrade is available in octane-specific variations and is conveniently flashed to the vehicle’s factory ECU through the OBD-II port without any physical modification to the factory ECU.

The ECU’s MED17 engine management system is responsible for proper operation of the engine during constantly changing environmental and load conditions. With built in compensational data for environmental variables and varying load conditions, the factory ECU is far more complex and intelligent than units found in other vehicle makes and marques.

APR's Calibration Engineers spent months calibrating the engine management system, including many hours of chassis dyno development. With a thorough understanding of the ECU’s torque structure, APR’s Calibration Engineers properly increased engine load to produce more power and torque across the entire power band. APR’s ECU Upgrade increases boost pressure, optimizes ignition timing, cam timing, lambda and more to produce higher output!

APR’s ECU Upgrades provides an excellent leap in horsepower and torque while retaining OEM knock control sensitivity and other built in safety features. This results in an exciting and powerful upgrade, optimized for various fuel grades found around the world.

APR’s ECU upgrades are one of the best horsepower-per-dollar modifications for the new 1.4T engine. The APR Stage I ECU Upgrade is designed to work without requiring other changes to the vehicle’s hardware. With the ECU Upgrade alone, APR’s Calibration Experts measured higher peak figures of 216 ft-lbs of torque and 168 horsepower with 98 RON fuel. Large gains were seen throughout the power band, including an additional 67 ft-lbs of torque and 43 horsepower. The increase in horsepower and torque directly translates to an exceptionally quicker vehicle!

Acceleration Enhancements:
Beyond horsepower and torque enhancements, APR’s Calibration Engineers were able to increase the acceleration rate of the vehicle through other calibrations changes. Ignition delay is reduced resulting in a more responsive pedal without altering overall throttle sensitivity. Furthermore, throttle lag commonly noticed at slow speeds and while reapplying throttle has been reduced.

 

Increased Fuel Economy:
APR’s Calibration Engineers paid close attention to several parameters directly related to fuel economy, especially while cruising at highway speeds. Depending on driving style and fuel quality, better miles per gallon may be achieved.

Speed Limiter:
APR’s ECU upgrade increases the vehicle's top speed limiter for blistering sprints around the track or across the Autobahn without the speed limiter shutting down the fun.

Left Foot Braking:
APR's Left Foot Braking feature allows more control over the vehicle’s throttle. The factory equipped vehicle's throttle input is disabled while pressing the accelerator and brake at the same time. Left Foot Braking, a common motorsport driving technique, allows the driver complete control over the vehicle’s throttle and braking system, which may give the vehicle the edge it needs at the track.

 

 

Stages, Requirements, and Recommendations


Stage 1

Free Trial Software Yes
NA Calibrations Stock, 91 octane (R+M)/2, 93 Octane (R+M)/2, 100 Octane (R+M)/2 and Valet
ROW Calibrations Stock, 95 RON Octane, RON 98 Octane, 104 RON Octane and Valet
Required Hardware None to Meet Advertised Results
Recommended Hardware APR/Carbonio Intake, APR 3" RSC Catback Exhaust, APR Intercooler

Stage 2
Free Trial Software Yes
Upgrade Incentives Existing APR ECU Upgraded Customers may Upgrade for Free
NA Calibrations Stock, 91 octane (R+M)/2, 93 Octane (R+M)/2, 100 Octane (R+M)/2 and Valet
ROW Calibrations Stock, 95 RON Octane, RON 98 Octane, 104 RON Octane and Valet
Required Hardware APR 3" Downpipe
Recommended Hardware APR/Carbonio Intake, APR 3" RSC Catback Exhaust, APR Intercooler

 

Installation Options

APR's ECU Upgrade is able to be installed by APR's professional dealer network or by APR directly. Most late model applications are available to be installed via DirectPort programming without removing your ECU or even opening the hood. DirectPort Programming is not available for all models and in these rare cases EMCS Modules are able to be soldered to the ECU.

DirectPort Programming

DirectPort Programming is another industry first brought to you by APR. DirectPort Programming is also referred to as "flashing" the ECU with the new operating software contained in APR's ECU Upgrade. No more soldering additional hardware to expensive and delicate factory electronics. DirectPort Programming facilitates ease of installation and offers new features to give you even more flexibility with your OEM ECU. DirectPort Programming is only available by bringing your car to an APR dealer or by mailing your ECU to APR directly.

Demonstration Software

All APR ECU Upgrades installed via Directport Programming are eligible for a 6 hour free trial. This means you can experience the performance of the APR ECU Upgrade for your vehicle at no cost to you for 6 hours of driving time!

Security, Warranty and Money Back Guarantee

All APR ECU Upgrades are fully encrypted to prevent theft of our valuable and proprietary coding information by lesser companies and to provide protection to our clients by keeping the upgrade undetectable to a dealership's VAG diagnostic tool.

All APR ECU Upgrades include a limited lifetime warranty against defects in the software and to provide free updates and reflashes as they become available. Installation may be additional and is not included in the warranty.

All APR ECU Upgrades offer a 30 day money back guarantee with no questions asked. If for any reason you are unhappy with your APR ECU Upgrade you may return the upgrade to your place of purchase for a full refund provided you are within a 30 day period from your time of initial purchase. Installation is not included in the guarantee and is at the discretion of the place of install.

Fitment:

  • Audi A3 (MK3 / Typ 8V) 1.4 TFSI EA211
  • Volkswagen Golf (MK7 / Typ 5G) 1.4 TFSI EA211
  • Volkswagen Jetta (Typ 1B) 1.4 TFSI EA211

- Availability and ECU Compatibility: Stages, programs, and features may not be available for all ECUs.

- ECU Revision Notice: Multiple ECU revisions exist for each platform. APR software may be temporarily unavailable when factory updates are applied. An APR dealer can check availability in person, or over the phone if the ECU boxcode/revision is known.

- Spark Plug Notice: APR recommends using colder heat-range spark plugs (Ex: NGK-R7437-9), properly gapped to a tighter gap (Ex: 0.024" ±0.002" or 0.6mm ±0.05mm), properly installed and torqued (Ex: Per the manufacturers specifications), and maintained with a shorter changer interval (Ex: 10,000-15,000 mi or 16,000-24,000 km).

 

 

 

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Compatible With

 
Eurotek Tuning Logo
accepted credit cards