Forge High Capacity Valve w/ fitting for TT-RS & RS3

Audi Performance Parts: High Capacity Piston Valve with Fitting Kit For AUDI TTRS or RS3 (8P)

Product Features & Benefits

This valve kit was developed for those who have tuned, or plan to tune, their vehicles in excess of 450hp, as it was observed that cars over 450bhp were randomly getting errors from the stock solenoid valve not functioning. Whilst the stock valve will operate as designed, with the boost level necessary for 450bhp, the stock valve couldn’t move the amount or volume of air it needed to, so the ECU was seeing too great a positive boost in the MAP readings between gear changes and assumes the stock valve wasn’t functioning correctly.

Forge Motorsports looked closely at this issue and noted that there would be no real fix for this as the size of the hole for the valve is too small in the stock elbow. The solution is a much larger DV port, which in turn would allow fitment of a larger valve. Forge also improved the internal flow of the elbow and removed restriction within the valve.

With the engine management on this engine being MAP based rather than MAF based, which is unlike many other Audi engines, Forge has also incorporated the option into the kit, of being able to run as a recirculation valve or with an atmospheric discharge / blow off.

Additional Details

This kit is available in BLACK only

Fitment:

• Audi RS3
• Audi TTRS Mk2 (2009+)

In The Box:

• 1 x FMARSDV Valve
• 1 x Inlet Hard Pipe
• 1 x Wiring Harness
• 1 x Solenoid, Bracket, and Screws
• 1 x T - Piece
• 6 x Cable Ties
• 1 x 2000mm of 4mm Vacuum Tube
• 2 x M6 x 30 Socket Cap Bolts
• 2 x M6 x 16 Socket Cap Bolts
• 1 x 25mm Blanking Plug
• 2 x 35mm Hose Clamps
• 1 x Straight Silicon Hose (25mm x 65mm)
• 1 x Forge USB Instructions
• 1 x Forge Keyring, Bottle Opener and Sticker