Introducing the all new RSe52 light weight wheels, the street 18-inch version of the 17-inch RSe05. Carrying the same concept from NEUSPEED's other wheel line ups, the RSe52 displays smooth and simple design lines giving the 'clean' and un-overbearing but yet complimentary to your European design Audi and Volkswagen vehicles.
The RSe52, specifically in 18x9.0J, has a key feature; DEEP CONCAVE HUB which provides weight saving as well as depth to the aesthetic of the wheel.
Each RSe52 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers!
Weighing just a mere 21.8 lbs, The RSe52 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.
BIG BRAKE KIT COMPATIBLE - Every RSe Wheel is specifically designed and engineered to be “Big Brake Kit Friendly”. Installation of most big brake kits will not require the use of adapters, spacers, shims or any other safety impairing devices. Whether you have factory or aftermarket big brakes we have something that will go over them with ample of clearance.
FLOWFORM PROCESS - It is a forge hybrid process that produces parts close, if not the same, to the weight of full forged wheels. This extremely efficient process offers fast production turn arounds, very little material waste, and most importantly, far stronger products compared to conventional casted wheels. ALL NEUSPEED RSe wheels are produced using this process, since 2004.
FACTORY SPEC - NEUSPEED, NM Engineering, and NEU-F are a tuning brand. Each and every RSe wheel is designed for specific vehicle model, just like factory wheels but wider and lighter.
PLUS (+) FITMENT - Although spec-ed like OE, NEUSPEED RSe wheels are wider in width and track, optimized for handling improvement as well as aesthetic. Unlike other wheel manufacturer, NEUSPEED wheels are NOT 'universal' fitments.
HUB CENTRIC - to vehicle hub bore and not LUG centric
TPMS Sensor - OEM Tire Pressure Monitoring System compatible
OEM Lug Bolt Seat - Factory lug bolts compatible
OEM Wheel Cap Emblem - Audi, Volkswagen, MINI, Fiat 500
WIDER & LIGHTER - 0.5 - 1.0” wider, avg. 5-10 lbs. lighter
Fitment with Recommended Tire Size:
** Require hub-ring 57.1 to 66.5 (supplied)
^ Aggressive fitment - some tire brands may need fender mods
NOTE: Wheels are sold each - choose Quantity (4) for a set
RSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.
Every RSe wheel comes with 'RS' center cap.
Compatible with Brembo, Stoptech and many other BBKs without wheel spacers/adapters.
NEUSPEED recommends Michelin Tires (not included).
Wheel Installation: Click here for Installation Instructions
Note that RSe wheels utilize OEM lug bolts with R13 ball seat (Audi & VW specific).
If aftermarket lug bolts are planned to be used, make sure they have the following specification:
When tightening lug bolts, avoid using impact wrench or air gun. Fast speed and high torque spin produced by impact wrench can cause cross thread and damage hub carrier.