Loading...Loading

APR 2.0 TSI/TFSI Gen3 ECU Upgrade for the MQB Platform

  • APR 2.0 TSI/TFSI Gen3 ECU Upgrade for the MQB Platform (Contact us to setup an Appointment MQB1)
  • Image 2
SKU:
Contact us to setup an Appointment MQB1
Weight:
0.00 LBS
Availability:
APR products from etektuning.com can only be sold and shipped within the United States.

VW/AUDI Performance Parts: APR 2.0 TSI/TFSI Gen3 ECU Upgrade for the MQB Platform

Product Features & Benefits

APR is pleased to present the ultimate engine control unit (ECU) upgrade for the 2.0T EA888 Gen 3 engine. APR’s ECU upgrade is available in octane-specific variations and is conveniently flashed to the vehicle’s factory ECU through the OBD-II port without any physical modification to the factory ECU.

The ECU’s Simos 12 and 18 engine management system is responsible for proper operation of the engine during constantly changing environmental and load conditions. With built in compensational data for environmental variables and varying load conditions, the factory ECU is far more complex and intelligent than units found in other vehicle makes and marques.

APR's Calibration Engineers spent months calibrating the engine management system, including many hours of chassis dyno development. With a thorough understanding of the ECU’s torque structure, APR’s Calibration Engineers properly increased engine load to produce more power and torque across the entire power band. APR’s ECU Upgrade increases boost pressure, optimizes ignition timing, cam timing, valve lift, lambda and more to produce higher output!

APR’s ECU Upgrades provides an excellent leap in horsepower and torque while retaining OEM knock control sensitivity and other built in safety features. This results in an exciting and powerful upgrade, optimized for various fuel grades found around the world69


Stage I ECU Upgrade

APR’s ECU upgrades are one of the best horsepower-per-dollar modifications for the new 2.0T engine. The APR Stage I ECU Upgrade is designed to work without requiring other changes to the vehicle’s hardware. With the ECU Upgrade alone, APR’s Calibration Experts measured higher peak figures of 381 ft-lbs of torque and 316 horsepower with 93 AKI octane fuel. Large gains were seen throughout the power band, including an additional 114 ft-lbs of torque and 87 horsepower. Even higher figures were achieved using race fuel. For those looking for a more modest bump in horsepower and torque, lower output software is available. In both cases the increase in horsepower and torque directly translates to an exceptionally quicker vehicle. Using advanced GPS measuring devices and the local IHRA certified drag strip, APR’s engineers conducted several acceleration tests. During the quarter mile sprint, the APR Stage I equipped vehicle crossed the finish line 1.094 seconds quicker, with an exit speed 13.3 MPH faster!

The APR Stage II ECU Upgrade is designed to work with APR’s Exhaust Downpipe. When combined with APR’s Intake System, peak power and torque figures grew further to 336 horsepower and 404 ft-lbs of torque. The additional hardware allowed the turbo to spool faster and power carried better towards redline, resulting in up to an additional 90 ft-lbs of torque and 28 horsepower.

Stages, Requirements, and Recommendations


Stage 1

Free Trial Software Yes
NA Calibrations Stock, 91 octane (R+M)/2, 93 Octane (R+M)/2, 100 Octane (R+M)/2 and Valet
ROW Calibrations Stock, 95 RON Octane, RON 98 Octane, 104 RON Octane and Valet
Required Hardware None to Meet Advertised Results
Recommended Hardware APR/Carbonio Intake, APR 3" RSC Catback Exhaust, APR Intercooler

Stage 2
Free Trial Software Yes
Upgrade Incentives Existing APR ECU Upgraded Customers may Upgrade for Free
NA Calibrations Stock, 91 octane (R+M)/2, 93 Octane (R+M)/2, 100 Octane (R+M)/2 and Valet
ROW Calibrations Stock, 95 RON Octane, RON 98 Octane, 104 RON Octane and Valet
Required Hardware APR 3" Downpipe
Recommended Hardware APR/Carbonio Intake, APR 3" RSC Catback Exhaust, APR Intercooler

 

Installation Options

APR's ECU Upgrade is able to be installed by APR's professional dealer network or by APR directly. Most late model applications are available to be installed via DirectPort programming without removing your ECU or even opening the hood. DirectPort Programming is not available for all models and in these rare cases EMCS Modules are able to be soldered to the ECU.

DirectPort Programming

DirectPort Programming is another industry first brought to you by APR. DirectPort Programming is also referred to as "flashing" the ECU with the new operating software contained in APR's ECU Upgrade. No more soldering additional hardware to expensive and delicate factory electronics. DirectPort Programming facilitates ease of installation and offers new features to give you even more flexibility with your OEM ECU. DirectPort Programming is only available by bringing your car to an APR dealer or by mailing your ECU to APR directly.

Demonstration Software

All APR ECU Upgrades installed via Directport Programming are eligible for a 6 hour free trial. This means you can experience the performance of the APR ECU Upgrade for your vehicle at no cost to you for 6 hours of driving time!

Security, Warranty and Money Back Guarantee

All APR ECU Upgrades are fully encrypted to prevent theft of our valuable and proprietary coding information by lesser companies and to provide protection to our clients by keeping the upgrade undetectable to a dealership's VAG diagnostic tool.

All APR ECU Upgrades include a limited lifetime warranty against defects in the software and to provide free updates and reflashes as they become available. Installation may be additional and is not included in the warranty.

All APR ECU Upgrades offer a 30 day money back guarantee with no questions asked. If for any reason you are unhappy with your APR ECU Upgrade you may return the upgrade to your place of purchase for a full refund provided you are within a 30 day period from your time of initial purchase. Installation is not included in the guarantee and is at the discretion of the place of install.

 

Application Guide
VehicleMarketEngineTransmission
Audi A3 (MK3 / Typ 8V) All 2.0 TFSI EA888 Gen 3 All
Audi TT (MK3 / Typ 8S) All 2.0 TFSI EA888 Gen 3 All
Skoda Octavia / VRS (MK3 / Typ 5E) All 2.0 TFI EA888 Gen 3 All
Volkswagen Golf GTI (MK7 / Typ 5G) All 2.0 TSI EA888 Gen 3 All
Volkswagen Tiguan (MK2 / Typ 5NA) All 2.0 TSI EA888 Gen 3 All

IMPORTANT PRICING AND AVAILABILITY DETAILS:- Pricing: Please contact Eurotek Tuning for pricing outside the USA.

- Availability and ECU Compatibility: Stages, programs, and features may not be available for all ECUs.

- ECU Revision Notice: Multiple ECU revisions exist for each platform. APR software may be temporarily unavailable when factory updates are applied. An APR dealer can check availability in person, or over the phone if the ECU boxcode/revision is known.

- Spark Plug Notice: APR recommends using colder heat-range spark plugs (Ex: NGK-R7437-9), properly gapped to a tighter gap (Ex: 0.024" ±0.002" or 0.6mm ±0.05mm), properly installed and torqued (Ex: Per the manufacturers specifications), and maintained with a shorter changer interval (Ex: 10,000-15,000 mi or 16,000-24,000 km).

 

Be sure to request the CARB Exempt Sticker with your order!

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Compatible With

 
Eurotek Tuning Logo
accepted credit cards