APR 2.0T FSI S3/Edition 30 Engine Conversion Software ONLY

APR's Transverse 2.0T FSI Audi S3 and VW Edition 30 GTI Engine Conversion Packages will upgrade your current 200hp and 207lb-ft Transverse 2.0T FSI Engine with all of the necessary OEM components from the European Audi S3 and VW Edition 30 GTI along with APR's FSI High Pressure Fuel Pump and meticulously recalibrated Engine Management to produce 355 horsepower and 368lb-ft of torque on 100 octane gas.

Reliability, drivability and enhanced performance that cannot be bested are the highlights of APR's newest OEM-component based conversion package.

APR's engineers have expertly recalibrated the engine management system to allow for nearly flat torque delivery from 2500 rpm's to 5000 rpm's which results in a smooth linear pull throughout the power band. Keeping the track enthusiast in mind, this conversion package will not result in overpowering of the driveline but will allow for smooth acceleration to easily maintain control while cornering.

The Borg Warner K04 turbocharger selected by VAG engineers is perfectly sized for the 2.0 liters of displacement to allow for stout horsepower numbers as the rpm's increase with no fall off as redline approaches. This ensures plenty of power in the high rpm's for continued acceleration in the straights or for shifting back into the healthiest portion of the power band at the drag strip.

Featuring APR's Patented EMCS program switching functionality and DirectPort Programming, APR's Engine Management Calibration for this conversion package allows for a range of Octane and situation specific calibrations to be installed simultaneously on your vehicle's ECU. These programs and features are able to be cycled through via your existing factory cruise control and activated in less than 20 seconds. You will be able to choose 1 to 4 of the following programs:

• Stock Mode = OEM ECU Settings
• 91 Octane Performance = 320hp and 320lb-ft
• 93 Octane Performance = 323hp and 335lb-ft
• 100 Octane Performance = 355hp and 368lb-ft
• Valet Mode = Limits rpm to 4500 and MPH to 70

*It is essential to ensure your vehicle is filled with at least the minimum octane rating for each Performance Calibration when activating the program.

Dyno Performance

NOTE Do not be fooled by claims from lesser tuners, a DSG reflash IS NOT Required to achieve the advertised power claims with an APR ECU Upgrade.