Increases performance by eliminating a common boost leak, and reducing octane lowering oil vapors and airflow restricting carbon buildup.
Eliminates a boost leak
Bypassing the PCV manifold connection point eliminates a possible failure point.
Catches oil and gunk
Oil and gunk pools in the can, not in the intercooler piping.
Easy to drain
A simple knob allows the system to drain in seconds without any tools.
Easy to install
Installs in minutes. The hoses pop right on without tools thanks to the OEM Norma fittings.
Easy to maintain
Yearly maintenance is a snap thanks to the two-piece billet design.
Resist oil degradation, kinks, abrasion, and blockage from freezing, with an OEM look.
High-quality can, and bracket
Strong, clean and attractive billet-aluminum and stainless steel parts look right at home in the engine bay.
The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk from entering the engine. The system eliminates a possible performance robbing boost leak, while reducing carbon buildup on intake valves, octane lowering oil vapors and oil pooling within the intake tract. It’s a simple modification to install, drains in seconds with the flick of a knob, and is recommended at all stages of performance.
An engine produces extreme pressures within its cylinders during operation and some ultimately slips by the piston rings and pressurizes the engine’s crankcase. This is exacerbated when increasing horsepower and driving harder. To relieve the pressure, the engine uses a failure prone PCV system that dumps the pressure, along with oil vapors, back into the intake tract to be consumed by the engine. Unfortunately, this results in the following performance robbing scenarios:
The APR Oil Catch Can System eliminates boost pressure from seeing the front PCV port. The system routes crankcase gasses through the APR catch can, which filters oil vapors through a track-proven four-staged baffling system. The vapors pool in the bottom of the can, while the rest of the pressure is diverted back to the intake tract where it’s burned off by the engine.
The result is simple:
*Please Note: Fits 1.8T/2.0T Gen 1 engines only. Does not fit 2013+ Gen 3 engines.
REQUIREMENT NOTES: The manifold PCV port must be blocked off to use this product. This can be accomplished with the APR boost tap. Also, the system is only designed for use without the factory engine cover installed. The rear blockoff is included.