GFBV D640-0001 Dinan Iridium Spark Plug - 12x26.5x14MM (Flat) - Heat Range 9 - Fits select 2007-2026 BMW, Mini applications

B48/B58/S58

Compatible OEM Part #Cross Reference: 12120040551, 12122455258, 12120046646 & 12125A4EF60; Dinan Iridium Spark Plugs are an excellent upgrade for tuned, and even stock engines. Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs.; Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they also are applicable to non-tuned / stock vehicles as well!; The D640-0001 spark plug applies to the following engines: Gen 1 B48, Gen 1 & 2 B58 engines as well as the S58.

Features and Benefits: 152% higher melting point than silver, 125% higher than copper, and 38% higher than platinum; 1 step colder than OEM (Gen 1 B48, Gen 1/2 B58, & S58); Acceptable for high performance / tuned and stock vehicle applications alike; An excellent match for Dinan ignition coils; Cooler operating temperature than stock plugs; Heat range 9 spark plug (Similar: Bosch 3, Brisk 10, Champion 4, Denso 27, and NGK 9); Hexagon: 14mm Bi-Hex; Install Torque: 17 Nm; Insulator Material: Ceramic; Lower required supplied voltage; Made in the EU; Optimized electrode design for hard to ignite fuels, such as ethanol; Projected insulator design; Resists preignition better than stock plugs; Seat Type: Flat; Stronger than copper and platinum; Supplied Gap: 0.5mm; Terminal Type: Cup; Thread diameter: 12mm; Thread reach: 26.5mm

Always check sizes, gap, and heat range specs before installing. Installation of the wrong length plug can cause damage to the engine. You must verify this before installing the plug.

DIN SP