Our Motorsport Tranny/Diff Mounts are a good alternative to the track density mounts:
034 is excited to announce the release of the 034Motorsport Street Density and Track Density transmission mounts for a wide range of Audis--B5/C5 A4, S4, RS4, A6, S6, Allroad!
We've been testing these mounts for some time to ensure they are reliable and meet the criterion for the intended use - results so far are very exciting!
WHAT THEY ARE: A new line of rubber motor mounts made FOR us by OE suppliers to OUR specifications.
STREET DENSITY Mounts are solid rubber mounts with a 50 durometer about 10% stiffer than stock, this means they still ride smooth and quiet but provide a marked improvement in drivetrain dampening over stock mounts. Livable street performance with serious sport intentions. Note, since there are no voids or air pockets in these mounts, even though the rubber is only 10% stiffer, the resulting reduction in drivetrain movement is actually 25% stiffer.
TRACKDENSITY Mounts are also solid rubber mounts, but with an 80 durometer approx 90% stiffer than stock, these are solid for all practical purposes and result in ZERO drivetrain movement. Vibrations from the engine are noticeably increased but not horrible. Definitely not smooth and quiet like stock mounts, but in return you get a completely locked down drivetrain with NO slop or deflection. These are perfect for the street/track enthusiast who doesn't mind a marked increase in vibration from the drivetrain.
NOTE, THESE ARE NOT OE MOUNTS, OR RS4 MOUNTS, AND ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications.
OE style gray rubber dust covers are included with each mount.
Mounts will fit all manual B5/C5 chassis 4 and 6-cylinder cars including the Volkswagen Passat and Audi A4/S4/A6.
Please Note: Only fits passenger side of manual transmsission 1.8T cars. Please visually verify your application before you order.
Choose stiffness below, price PER mount, one car will need 2 except for manual transmission 1.8Ts as stated above.
V6 cars and cars with automatic transmissions do not use a "through bolt" stock, if you have a V6 and/or automatic transmission application choose the V6 bolt kit below.