Forge Blow Off Valve and Kit for BMW Mini, N18 Engine

  • Forge Blow Off Valve and Kit for BMW Mini, N18 Engine (FMDVR60A)
  • Image 2
  • Image 3
  • Image 4
$290.00 $261.00
(You save $29.00)
5.00 LBS
Direct Ship (shipping times may vary)
Calculated at checkout

MINI Performance Parts: Forge Blow Off Valve and Kit for BMW Mini, N18 Engine (FMDVR60A)


Product Features & Benefits

Designed specifically for the BMW/Peugeot N18 engines, (Cooper S 2011 onwards, JCW Cooper S 2013 onwards, R58 Coupe 2012 onwards, Peugeot 208 GTi late 2012 onwards, RCZ THP 156 & 200 2011 on). This product is either recommended where the boost pressure has been increased by an ECU software upgrade, for those wanting a loud blow off sound, or simply as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all. This doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem (see image above).

The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles and oil contamination, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. (see image above)

Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included.

Additional Details


  • MINI R55/56/57 Cooper S 2007+
  • MINI R58 2011+
  • MINI R60 Cooper S/Countryman/All4
  • Peugeot 208
  • Peugeot RCZ THP 156
  • Peugeot RCZ THP 200

In The Box:

  • 1 x FMDVR60A Valve
  • 1 x Wiring Harness
  • 1 x Solenoid, Bracket, and Screws
  • 1 x 2000mm Length of 4mm Vac Hose
  • 1 x Aluminium Spacer
  • 1 x M6 x 30 Hex Head Bolt
  • 1 x M6 Penny Washer
  • 1 x M6 Nyloc Nut
  • 1 x Uprated Red Spring
  • 10 x Cable Ties
  • 1 x 5mm T Piece
  • 1 x Forge USB Instructions
  • 1 x Forge Keyring and Sticker

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Compatible With

Eurotek Tuning Logo
accepted credit cards